Refinery Gas Analyser (RGA)

Introduction
The RGA performs complicated separations of light hydrocarbons and permanent gases from refinery gas in a single injection (C1 to C5 saturates and unsaturates with the initial backflush of C6+). The Refinery Gas Analyser (RGA) provides a complete solution system for refineries, research-and-development, plant laboratories, as well as other allied oil and gas industries.

Features & Benefits:

• Excellent separation of C3 and C4 unsaturates and near baseline separation of iso-butylene and
  i-butene indicates the quality of the analyser.
• Meets the specifications of the UOP 539.
• A dedicated solution system for refineries and other industries
• Custom-built configuration enables excellent separation of components of interest
• Automated sampling and column switching permits unattended operation
• High quality, helium tested valves used for sampling, column switching and backflushing
• Initial backflush of C6+ produces a sharp peak, providing greater sensitivity and reproducibility
• Reports highlight : Specific gravity, calorific value, vapor pressure, Wobbe number and molecular weight results
• An optional configuration with electrically actuated valves is also available.

Configuration

• GC Trace 800 with dual packed injector ports.
• Two Thermal Conductivity Detectors (TCD) or combination of Flame Ionization Detector (FID), TCD and Methanator (Optional).
• Customised columns.
• Switching, Backflush, Electrically Actuated (Optional) and Heated Gas Sampling Valves.
• Reference for Standard Operating Procedures.
• Satellite Configuration with Pulsed FPD or normal FPD.
• Calibration Standards.
• Chromatography Management Software.