Satellite GC

Certain complicated petroleum analysis warrant the use of a oven system, to facilitate the use of variant analytical conditions during a run. The system is available with a TCD, FID or FPD.

BTEX Analyser

The analyser is configured for continuous monitoring of benzene, toluene, ethylbenzene and xylene isomers. Alongwith a Photo Ionization Detector (PID), this instrument can be configured for unattended operation and does not require a cryogenic attachment. A complete analytical cycle takes approximately 15 minutes in the isothermal condition.

MTBE Analyser

Configured for analysis of C1 to C4 alcohols, MTBE (methyl-t-butyl-ether), TAME (t-amyl-methyl-ether), MEK (methyl-ethyl-ketone) and benzene in gasoline completely automated and unattended. The configuration includes a capillary gas chromatograph with a FID, a set of switching valves, multiple capillary columns and an accessory kit.

Green Oil Analyser

This analyser is configured to perform online analysis of green oil in polypropylene. Using a backflush valve, the entire analysis is completed within 20 minutes.

LPG Analyser

The LPG analyser is used for the analysis of C1 - C5 The system calculates the liquid volume, specific gravity and vapour pressure. An LPG sampling system is also available.